KY-028 Digital Thermistor Temperature Sensor Module



KY-028 Thermistor Temperature Sensor Module has a digital interface, built-in 13 LED build a simple circuit, making the temperature warning lamp 13 comes with digital interfaces of the LED, the digital temperature sensor connected digital three interfaces, when the digital temperature sensor senses a key signal, LED lights, otherwise off.

Technical details:

  1. Operation voltage 3.3 V, 5 V
  2. Response time: (very fast)

Connectivity of KY-028 Thermistor Temperature Sensor :

4 pin connector, pins as follows:

  1. AO: Analog Output
  2. G: 0V Ground
  3. +: 3.3V – 5V Supply
  4. DO: Digital Output

Features of KY-028 Thermistor Temperature Sensor :

  1. Using the NTC thermistor sensor , good sensitivity.
  2. The comparator output signal is clean, good waveform , driving ability , more than 15mA.
  3. Adjust the temperature distribution position detection threshold.
  4. The working voltage: DC 3.3V-5V.
  5. The output format : digital switching outputs ( 0 and 1 )
  6. A fixed bolt holes for easy installation.
  7. Using a wide voltage LM393 comparator

What’s inside the module:

The sensor has 3 main components on its circuit board. First, the sensor unit at the front of the module which measures the area physically and sends an analog signal to the second unit, the amplifier. The amplifier amplifies the signal, according to the resistant value of the potentiometer, and sends the signal to the analog output of the module. The third component is a comparator which switches the digital out and the LED if the signal falls under a specific value. You can control the sensitivity by adjusting the potentiometer.

Package includes:

1x  Thermistor Module KY-028

Ntc 103 Thermistor Temperature Sensor Resistor 10K


There are no reviews yet.

Be the first to review “KY-028 Digital Thermistor Temperature Sensor Module”

Your email address will not be published. Required fields are marked *