100g Ferric Chloride for PCB Etching

Ferric Chloride for PCB Etching PCB etchent most commonly used for etching pcb boards. Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.

Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measure are in place like hand gloves, glasses etc.

How to Use Ferric Chloride:

1. Suggested only if you know how to etch PCBs with FeCl3.

2. You must use gloves while etching with FeCl3 as it may cause irritation to your skin.

3. Mix etchant in wanter, do not drop water over the etchant.

4. Do etching procedure in open space so any chemical gas produced during process can dissipate in air easily.

5. Put etchant+water solution in plastic box only.

Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.

Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measure are in place like hand gloves, glasses etc.

OTHER PRODUCT:

140 PC SOLDERLESS BREADBOARD JUMPER CABLE

DC 12V Led Warm White High Bright LED

Watch a Video Tutorial

How To Make a Printed Circuit Board (PCB) using Ferric Chloride and Maker pen