4 Channel NIC2262/2272 Wireless Remote Control

1. CMOS Technology

2.  Low Power Consumption

3. Very High Noise Immunity

4. Up to 12 Tri-State Code Address Pins

5. Up to 6 Data Pins

6. Wide Range of Operating Voltage: Vcc = 4 ~ 15 Volts

7. Single Resistor Oscillator

8. Latch or Momentary Output Type

9. Application environment: Wireless remote control switch, remote control socket, data transmission and remote control toys, anti-theft alarm host, garage doors, gates, gate, the gate door control, such as industry and its remote control sound field, etc.

1. Operating voltage: DC12V (27A / 12V battery a)

2. Working Current: 10mA / 12V

3. Radiation power: 10mw /12V

4. Modulation: ASK (amplitude modulation)

5. Transmission frequency: 315MHZ (SAW frequency stabilization)

6. Transmission distance: 50-100M (no proof, the receiver sensitivity is negative 100dbm)

7. Encoder Type: Fixed code

1. Working voltage DC5V

2. Receiver sensitivity is -98db.

3. Size: 41*22mm

4.  There are four buttons on the remote control, corresponding to the receiving board feet four data bits D0, D1, D2, D3. Press the button to transmit a signal, the corresponding data bit will output high.