150W CO₂ Laser Cutter & Engraver — 4×3 ft Bed Full Assembled

Built for production shops and makers, the Multan Electronics 150W CO₂ Laser combines a spacious 4×3 ft bed with a reliable RECI tube and an industrial CW-5200 chiller. Run jobs the way you prefer: offline from SD card, over the online app, or directly from your laptop using LightBurn. The aluminum and MS steel chassis minimizes vibration for clean, repeatable results.

Who is it for

Sign makers, acrylic fabricators, model makers, packaging, leather craft, custom gifts, and rapid prototyping.

What it cuts/engraves (examples)

Cut: acrylic, MDF/plywood, solid wood, paper/card, leather, foam, certain rubbers, fabrics.
Engrave: wood, acrylic, coated metals, anodized aluminum, glass, stone, leather, plastics.
Note: Max thickness depends on material, optics, and air assist. Typical for 150W: acrylic up to ~20–25 mm; MDF/ply up to ~12–15 mm.

Highlights

• 150W RECI tube with stable power and long service life

• 4×3 ft bed for full-size sheets and nested jobs

• CW-5200 chiller keeps tube temperature stable during long runs

• LightBurn compatible workflow

• SD card printing, online app control, and direct laptop/USB control

• Emergency stop and interlocks (where equipped)

What’s in the box

• 150W CO₂ laser machine with RECI tube installed

• CW-5200 industrial water chiller

• Power cable and basic tool kit

• Exhaust port (blower/ducting as per configuration)

• User guide

• LightBurn compatibility (license: included or sold separately—confirm)

Specifications

• Laser type: Sealed CO₂ glass, 150W (RECI)

• Working area: 4 × 3 ft (≈1220 × 910 mm)

• Z-clearance / pass-through: confirm

• Frame: Aluminum + MS steel profiles

• Cooling: CW-5200 water chiller

• Software: LightBurn compatible

• Control: SD card, online app, laptop/USB (and/or Ethernet)

• Motion: Stepper-driven with homing switches

• Repeatability: ≤0.05 mm (typical—confirm)

• Electrical: AC 220V ±10%, 50/60 Hz (single phase)

• Machine size/weight: confirm dimensions and weight

• Safety: E-stop, interlocks, grounded chassis, fused power

• Warranty: e.g., 12 months machine / 6 months tube (confirm)

Maintenance

• Use distilled water in the CW-5200; keep temperature within recommended range

• Clean mirrors/lens regularly; check belt tension and rail lubrication

• Ensure good exhaust and air assist for clean edges and reduced flare

Shipping & support

• Lead time: in stock or made-to-order (e.g., 10–15 business days)

• Crated shipping; arrival checklist provided

• After-sales support for calibration and basic maintenance

FAQs

Q: What materials can I cut with 150W CO₂?
A: Acrylic, MDF/ply, wood, leather, paper/card, foam, certain rubbers and fabrics. Metals require a fiber laser; CO₂ can engrave coated/anodized metals.

Q: Is LightBurn included?
A: The machine is fully compatible. License is included or sold separately—confirm your package.

Q: How is the tube cooled?
A: With the CW-5200 industrial water chiller.

Q: Can it run without a PC?
A: Yes. SD card printing is supported. You can also use the online app or connect a laptop.

Q: How thick can it cut?
A: Depends on material and settings. Typical: acrylic ~20–25 mm; MDF/ply ~12–15 mm with optimized optics and air assist.

Q: Do I need ventilation?
A: Yes. Use proper exhaust to the outside and air assist for cleaner edges.