Creality 24V 14.6A 350W Slim Power Supply for 3D Printer

Power Supply for 3D Printer for 3D Printer Features

 

1.High Efficiency and good price

2.Built-in EMI filter

3.100% full load burn-in test

4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit

6.LIFETIME WARRANTY!

 

Specifications of Power Supply for 3D Printer 24V 14.6A 350W Slim Power Supply 

MODEL		LRS-350-5	LRS-350-12	LRS-350-24	LRS-350-36	LRS-350-48
OUTPUT	DC  voltage	5V	12V	24V	36V	48V
	Rated output current	60A	29A	14.6A	9.7A	7.3A
	Output current range	0~60A	0~29A	0~14.6A	0~9.7A	0~7.3A
	DC power	300W	350W	350W	350W	350W
	Voltage adj.range	±10%	±10%	±10%	±10%	±10%
	Voltage tolerance	±2%	±1%	±1%	±1%	±1%
	Ripple and noise	70mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p
	Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Load stability	±0.1%	±0.5%	±0.5%	±0.5%	±0.5%
INPUT	AC voltage range	90~132VAC/180~264VAC selected switch
	Current	6.8A/115V 2.4A/230V
	Efficiency	80%	85%	86%	86%	86%
	AC Inrush current	Cold-start current 60A/115V  60A/230V
	Leakage current	<2mA/240VAC
PROTECTION	Overload	110 ~ 150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	Over-voltage	Protection type : Shut down o/p voltage, re-power on to recover
		5.75-6.9V	13.8-16.2V	28.8-33.6V	41.4-48.6V	55.2-64.8V
	Short Citcuit	Protection type : Hiccup mode, recovers automatically after fault condition is removed
SAFETY	Setup rise hold up time	200ms,100ms,20ms
	Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES
	Withstand voltage	Input and output interval,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC
	Isolation resistance	Input and output interval,Input and enclosure,Output and enclosure,500VAC/100M Ohms
ENVIRONMENT	Temperature coefficient	±0.03%/°C (0~50°C )
	Working temperature and humidity	-20~+60°C,20~90%RH
	Store temperature and humidity	-40°C~+85°C,10~95%RH
OTHER	Overall dimension	215*115*30mm
	Weight	0.72Kg