Buck Boost Converter 4A Module With LCD Display Pakistan

1,150.00 

Out of stock

Description

Product description

Buck Boost Converter 4A Module LCD input and output voltage, output current output power;
Input anti-reverse protection, reverse connection will not burn;
Can be step-up and step-down, the output voltage 0.5-30V arbitrary regulation, limiting the current 0-4A arbitrary regulation Buck Boost Converter 4A Module.

What does a buck boost converter do?
What does a buckboost converter do? The main objective of a buckboost converter is to receive an input DC voltage and output a different level of DC voltage, either lowering or boosting the voltage as required by the application.
What is the difference between buck and boost converter?
In PV applications, generally, a Buck converter is used to charge the battery (since the output from a Buck converter is supposed to be less than its input), while a Boost converter is used to “match the load voltage” from the (supposedly) low voltage PV input.

Output anti-intrusion, the battery charge without additional anti-reflux diodes;
Button control output ON / OFF status, and you can set the power-on default is ON or OFF;
Ascending and descending chip used as the main controller, external 60V 75A MOS tube as a switch, double 60V 5A SS56 Schottky rectification, 60V voltage value, superior to the market immature XL6009 / LM2577 program (a lot Device pressure value is not enough, MOS tube and Schottky diode pressure value must be greater than the input plus input voltage value);
Output ripple small, LC filter;
With heat sink, send module support isolation column.

How to use:

 

TB6600 Stepper Motor Driver 4A 9 to 42V TTL 32 Micro-Step CNC

150W DC-DC Buck Converter 10-32V to 12-35V 150W DC-DC

Reviews

There are no reviews yet.

Be the first to review “Buck Boost Converter 4A Module With LCD Display Pakistan”

Your email address will not be published. Required fields are marked *